1 / 2
AR-15 BRACE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Loosely based on the SBA4/5
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 125
- Makes
- 0
- Views
- 653
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This brace will fit a mil-spec buffer tube.
Body and pull tab: Pla+ is the minimum recomended filament for the body of the brace, I printed using Siraya Tech PET-GF.
.4 nozzle
.2 layer thickness (pull tab .1)
35% gyroid infil (pull tab 100% rectilinear)
Tree supports.
Rear fin: TPU 98A
.4 nozzle
.2 layer thickness
30% 3d cross infil
No supports.
You will also need the following hardware:
1x 0.7*7*15mm spring.(cut off one loop if needed) 1x 3/16" * 2" clevis pin
1x 3/32x3/4" roll pin