F150 Magnetic phone mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Magsafe mount for the 21 and up Ford F150's
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
An Apple Magsafe mount for the front storage area on the 14th gen F150's (2021+). It's designed so the charger puck will press fit into it and not require any glue. This should work with any magnetic charger that is the same dimensions as the Apple version.
There are two versions to choose from. One with a notch in the front center and one without. It's a larger model so recommend a 300x300mm large format printer or you may need to cut it with your slicer and glue it together
This was Printed on an SV07 Plus using black Polymaker HT-PLA and easily handles the south Texas heat but you can also print it with PET-CF, PETG, or ABS.
Basic PLA Print settings/
0.20 mm layer height.
40% Gyroid infill
4 perimeters
5 solid top/bottom layers.
No supports or brim needed.