1 / 2
Sharpal 8x3 diamond sharpener base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base that fits Sharpal dual-grit diamond sharpening stone.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- BSD License
I could not find an “open” model, so I made my own. It fits the stone snugly, no wiggle room. I also made a cutout for the blade angle guide, although anything over 0.1mm layer height makes it ugly.
Material: any
Uses just under 100g of filament
Layer height: 0.2mm (0.1mm if you care how the insert slopes look)
Wall loops: 2
Supports: No
Infill: 15% (if you do 40% or higher it'll be nice and heavy, but will use up WAY too muuch)