1 / 3
Dewalt Router dw600 / Kreg ripcut track - straight line jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw models like this for plunge saw rails. So I designed one for a kreg ripcut guide.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 26
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Simple jig for dewalt dw600 and kreg ripcut “guiderail” to cut straight lines.
It has two marks on the base to line up the center of your bit to the line you're cutting.
Use the pause function in your slicer to change cholors for logo.
Hardware - 2 button head hex drive - m5x20 nuts and bolts
Plus the hardware from base of router.
I recommend printing out of PETG for durability and “hardness”. The hardness helps slide through the rail.
ABS was too soft and hangs up and is also harder to print.