Nerf Slingfire very long barrel mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small but huge mod for my favorite Nerf gun. Unfortunately, you need Shellcut. You don't need much hardware
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A modification for a long barrel.
Everything is designed to be stable under load.
All measurements are metric in mm.
You will need:
* 20/22 barrel, minimum 400mm
* 17 barrel, 345mm
* 2-4 M3x10 screws ( Base pieces )
* 2 M3x20 screws ( Middle piece )
Quick assembly instructions:
First, cut the tubes and the blaster to size.
Next, attach the long base pieces to the blaster and slide the handle onto the bottom. You might need a hammer for the handle.
Now, attach the inner tube with an outer diameter of 17 mm to the middle piece and slide it onto the base.
Finally, slide on the last piece and screw everything together. You can now insert the larger tube.
Tip: Check if you can comfortably install the large tube before assembling everything. My tolerances are quite small to ensure nothing wobbles.
Tip 2: Place the base pieces on the small edge as shown in the picture.
You need an A1 or similar printer, as the parts are relatively large.