1 / 4
Modified Z-Axis Tensioner for the SimpleCore Redux
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved z-axis carrier and idler with two tensioner screws
- Rating
- 4 / 5
- Likes
- 11
- Downloads
- 76
- Makes
- 1
- Views
- 428
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified z-axis carrier and idler for the SimpleCore Redux. The original single tensioner screw and captive nut have been replaced by two screws and threaded inserts. This carrier and idler is a direct replacement for the original part and uses the same 5x20 dowel and 20T idler wheel.
Additional parts needed are:
- 2 x M3x4.6 threaded inserts
- 2 x M3x25 bolts for approx 10mm adjustment, OR
- 2 x M3x30 bolts for approx 20mm adjustment
No other parts need modifying.
Printing instructions are the same as for the original:
- 4 Walls - 4 Top / Bottom layers
- 30% Gyroid infill
- ASA/ABS are recommended, use PETG-CF as a minimum!