1 / 9
Brio mini: maintenance building
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
A round maintenance building for my brio mini set, with 8 parking slot.
For the scad file need the "base.scad" from the track set. https://www.prusaprinters.org/prints/14900-brio-mini-track-set
The turntable top from the turntable https://www.prusaprinters.org/prints/14902-brio-mini-turntable
NOT COMPATIBLE BY STANDARD BRIO/IKEA/TESCO TRACK!
Print instructions
Category: Toys & Games Print Settings
Printer Brand: RepRap
Printer: Prusa i3
Rafts: Doesn't Matter
Supports: No
Resolution: 0.3 mm
Infill: 20%
Notes:
Printed seperatly.
Post-Printing
Introduction
Need:
- 1 base
- 1 roof
- 8 wall_small
- 2 wall_large: it can be a wall_large_a, a wall_large_b.
- 1 turntable_top
Printed seperatly and glued together (Of course, the turntable top is not glued!)