1 / 3
Spielzeug Baustellen Pylon Traffic Cone Bruder — image 1
1 / 3

Spielzeug Baustellen Pylon Traffic Cone Bruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€4.09 – €5.00 net (excluding VAT)

For file: pylon-mehrfarbig-49-MMU3_0.4n_0.2mm_PLA,PLA_COREONEMMU3_3h29m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.54 excluding VAT (range midpoint).

Weight reported by the author
79 g
Print time reported by the author
3.48 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

- Mehrfarbdruck - MMU3 & Prusament PLA

Rating
0 / 5
Likes
35
Downloads
179
Makes
0
Views
612
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Spielzeug Baustellenpylon für den kleinen Bauarbeiter

  • Mehrfarbdruck mit MMU3 ( am besten 49 Stück drucken, da die gleiche menge Müll wie bei einem Pylon anfällt, siehe Bild3)
     
  • Unser Bauarbeiter nutzt sogar den Abfall als Straßenabsperrung 
     
  • H:30.00mm
  • B:24.10mm
     
  • Kein Support nötig

!!! Die Extruder müssen evtl. angepasst werden ( hier Orange: Extruder 3 / Weiß: Extruder 4) !!!

Tags