6U DIN Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact but relatively spacious enclosure designed to house up to 6U of DIN rail-mounted devices.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Compact enclosure designed to house up to 6U of DIN rail-mounted devices. Perfect for the usual circuit breakers, relays, etc... but it will also fit larger specialized devices. I designed this to work with a 100A /2P auto transfer switch, which is dimensionally much bulkier than normal, so in theory this should fit almost anything that will mount to a DIN rail.
The DIN rail mounts to the case with two M4 x 8mm bolts. There are slots for M4 nuts on the rear. Attach the faceplate to the case with M3 screws - they should self-tap if printing tolerances are correct. The holes on the top and bottom are sized for M20 cable glands to mount on snugly, and at a slight downward angle. Lastly, there are four 5.0mm mounting holes on the inside of the case if you desire to fasten it to a surface.
I haven't learned parametrization yet, but if there's sufficient interest I may release some alternate enclosure sizes.
Category: Other