Open Lattice Christmas Bell
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.94 – €3.60 net (excluding VAT)
For file: open_lattice_bell_0.15mm_PLA_MK3S_4h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.27 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 4.37 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A fun, easy, lightweight print for the tree
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 259
- Makes
- 1
- Views
- 592
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is one of the easiest of my models to print.
You will need supports. Use grid supports on build plate only. An overhang angle of 40 degrees works very well. The loop at the top prints very well without supports.
I recommend adding a brim on the outside and inside.
Most of the ornament only requires 1 perimeter with a top of 4 layers and bottom of 3. For the top 11mm, I made gave it 2 perimeters, top of 5 and bottom of 4.
I've provided my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer.