MiniSkidi v3 arms with printed text
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed the arms of miniskidi to replace the inset text with printed text in a contrasting colour
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 1
- Views
- 58
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
To print, import both arms into the slicer, then add a part to each selecting the text for the correct arm. The text will load in the right location & orientation.
Text elements are 0.25mm thick so print on 0.2mm layer settings with just one colour change.
I don't have an MMU/AMS so the examples in the photo were done with manual colour changes just fine.
For these I used 3x perimeters, 15% infill, and structural print settings, Filament is eSun PLA+ in yellow and black
Apologies if this is a duplication, but I couldn't see any others like this.