Reolink Trackmix Camera Roof Soffit Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount should fit most of the roof soffit as long as it is not shorter than 210mm
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Initially I thought this will just be a plate with few screw holes, but my roof soffit panel is extra long (360mm to be exact), so I cannot fit it with my printer. Given the camera is quite heavy, and I want some flexibility to adjust the camera, I have derived this over engineered 3 piece base mount.
You will need 1 base and 2 hook to complete the build. For assembly, you will need 4 x #8 screws with nuts and washers for mounting the camera to the base. Then an additional 8 x #6 screws for the extension arms (4 for each side). Once you assemble the base, you can just slide in the whole thing under your roof soffit. If you life in Canada, here is the amazon link for the screw set I used: https://www.amazon.ca/Besitu-10-24-8-32-6-32-4-40/dp/B0BDVDCJJN?crid=27W5AFPY6ATQ9&dib=eyJ2IjoiMSJ9.kI0xgv3ieFbK7EUQm2ykknuk5gjEgQQACRaFqAyNi4t9sp0D5LITZZaT6kdW3gHZKVxW2dgsy_Vgxnf4llufc7SsTRM_j8djoI_WQoZnUNnar_XCqKlWb5C58g8UfX98qyV0qK7NDdxC3tKMFKvi8GKJwmeqJZ4zzJ-lFBcRAVDaqT6auN7RvLHznnLCLXG49l8T1PwlB779ODyOkl2BFFcCs6MpkG6FgobCVkpwh98Y1lGFTnBXnD3TyQJboKjV6-xwZDM83MDZYTrBZ2alvy3S3VD4ZcVjMp_xUI28yLc.PAxDC-tCTZnInYjzWh5QbYePhbQJypa--8lkOCGWPVM&dib_tag=se&keywords=screw%2Bsets&qid=1763941097&sprefix=screw%2Bsets%2Caps%2C119&sr=8-8&th=1