Covertec Wheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy, glueless Covertec Wheel.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Covertec wheels are a type of belt connection used with lightsabers as an alternative to D-rings. Covertec was actually a company that made these wheels for electronics. Starting in Star Wars the Phantom Menace, these types of clips were used as a sleeker and sturdier substitute for the original D-rings.
No ideal covertec wheel design existed for my hilts. I made these to be glueless while still being robust enough to reliable carry heavy, moving loads. The goal was to make it a staple for all future designs.
Instructions:
Filament: PLA
Layer Height: 0.2 mm
Infill: 15%
Supports: N/A
- There is an interface covering the hole on Covertec_Wheel1 that will need to be poked out. Its purpose is to remove supports.
- Push Covertec_Screw through the holes of Covertec_Wheel1 and 2.
- Insert into Covertec_Base
If you have any feedback or requests for implementation, let me know!