1 / 4
QiDi Q2 TPU fixer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer for stable TPU printing for the QiDi Q2.
- Rating
- 5 / 5
- Likes
- 348
- Downloads
- 2,312
- Makes
- 18
- Views
- 9,784
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Spacer for stable TPU printing for the QiDi Q2.
In the stock setup, there is a 2.6–2.7 mm gap between the front wall of the feeder housing and the drive gears, where soft TPU filament can sometimes slip out. With this spacer installed, the filament has nowhere to escape and feeds into the hotend instead of slipping past it.