1 / 3
Pylon / Traffic Cone (Multicolor)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two versions: Hollow (stackable) and massive (for scaled down tiny sizes)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 1
- Views
- 224
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I just draw it 1:1 from my real pylon I have (BIG), but you can easily scale it down to your needs in the slicer.
If you want it very small, choose the massive version. The massive version also allows to embed a magnet by adding a negative volume in the slicer (see attached screenshot) and adding a pause to allow to insert it.
The title photo shows:
- The smaller cone with 4% scaling (18.8mm height), massive with embedded magnet d4x2mm and printed in PETG orange and silver.
- The bigger cone with 10% scaling (47mm height), hollow, stackable, and printed in PETG orange and glow in the dark, gives a very nice effect in the dark!
- Smallest size of the hollow one to get a reasonable wall thickness (2 x 0.4mm with a standard nozzle) is about 8% scaling.
Please leave a comment and make photo!