Card Box Locking Divider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mechanical card box divider that pushes against the walls of the box to hold itself in place. Good for not full boxes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
A card box divider assembly that, with the twist of a knob, pushes on the sides of the card box to hold up non-full rows of cards to they don't fall down.
For 75mm wide card box rows.
Print:
1x BASE_1_DIVIDER
1x BASE_2
1x KNOB
2x LINK_ MIDDLE
2x FRICTION_LINK
Assembly (First picture shows rough assembly):
Attach Knob to BASE_1_DIVIDER.
Place LINK_ MIDDLE on top of Knob arms. Stick filament thru both holes (like a pin) and cut flush with the top of LINK_ MIDDLE. Repeat for other side.
Place FRICTION_LINK on BASE_1_DIVIDER and under LINK_ MIDDLE. Repeat filament-as-a-pin thru holes in LINK_ MIDDLE and FRICTION_LINK
Lastly, line hole in BASE_2 up with knob and snap onto BASE_1_DIVIDER.
Solidworks files also provided for ease of remix.