All infill combinations ISO 527-2 testing specimens
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.47 – €0.57 net (excluding VAT)
For file: 10%_3dhoneycomb_30m_ISO_527-2_Type_1A_-_170mm_0.2mm_PLA_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.52 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dogbones with all infill patterns and infill density increments of 5%. 0% is also included.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the Adaptive Cubic at the scale of the dogbone. Zig Zag is also excluded, as the testing was done in 2023. These files also come from PS v2.6.0-alpha5 and v2.6.1
The single files (%) include all current patterns and do not exclude any 5% increments, and come from PS v2.9.0. Enjoy.