1 / 4
Carbon filter fan for Flashforge AD5X in whole-printer enclosures — image 1
1 / 4

Carbon filter fan for Flashforge AD5X in whole-printer enclosures

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed for those who are using their AD5X in the "entire printer goes inside the enclosure" type enclosures.

Rating
0 / 5
Likes
18
Downloads
38
Makes
0
Views
1,583
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store


If you are using your Flashforge AD5X together with an enclosure of the kind that the whole printer goes inside of (as opposed to those like the official Flashforge enclosure that attach to the frame, with the spools remaining outside), this is a filter unit you can use when printing materials like ABS that release fumes.

I have also uploaded a non-mounted version, which may be useful to those with other enclosures / printers. The FreeCAD source file is also present.

Non-printed parts
4x M3x4x5 heated inserts (mounted version only)
4x M3x5x5 heated inserts
4x M3x8 screws (mounted version only)
4x M3x25 screws
50x50x10 USB fan [AliExpress]
Activated carbon filter sheet, 2mm to 3mm thick [AliExpress]

Print settings
No special settings are generally needed, but the combination of thin layers + thick wall lines can help achieve nicer-looking results. Print in PETG or better. Layer adhesion is important for the mounting piece.

For the mounting piece, it should be oriented for printing so that it is upside down relative to how it would be during actual usage (see pictures). All other pieces should be left oriented as they are in the STL / CAD files.

Print two copies each of Flat Plate and Gap Plate (you can print more copies of Gap Plate if you want additional layers of carbon filter; you might need longer screws if you add more than one extra though). Print Bottom if you do not want a mountable filter fan; print Bottom Mountable and the mounting piece if you do.

Assembly
- Install the four M3x5x5 heated inserts in the corner pole holes of the Bottom.
- If using the mounting piece, install the four M3x4x5 heated inserts in the corresponding holes on the rear side of it.
- If using the mounting piece, secure it to the base with four M3x8 screws (through the holes in the bottom of the base, and into the heated inserts in the mounting piece).
- Cut two circular pieces of the carbon filter to fit in the recess in the Gap Plate piece. (If you printed more Gap Plates, cut a corresponding number of carbon filter pieces). I find that pressing the plate into the filter leaves an outline that can be followed to get the right size cut.
- Insert the filter pieces into the Gap Plates.
- Place an M3x25 screw through each corner hole of a Flat Plate piece.
- Place the fan onto the screws from the previous step, making sure that the airflow direction is towards the Flat Plate from the previous step.
- Place all Gap Plates onto the screws. The open end of them should be facing away from the fan (so that there is a barrier between the fan and the closest filter).
- Place the other Flat Plate onto the screws.
- Carefully holding this assembly together, screw it onto the Bottom. For ideal results, the fan's cable should be coming out at the top. Tighten the screws fairly well, but do not overtighten.

Usage
- Remove spool holder #1 from your AD5X (slide it upwards). You can still use Slot 1 by mounting the spool elsewhere (such as running it directly from a dryer).
- Attach the assembled unit to spool holder #1's mount.
- Plug the USB cable into the USB port in the AD5X's screen. (It is not possible to control the fan with software. When the USB cable is plugged in, the fan runs at full speed; when unplugged, it stops.)

Tags