Toolcraft desoldering gun cable clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These clips can be used with the Toolcraft ZD-8925 Desoldering gun, to keep the cable and vacuum hose together.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
These clips are designed to be used with the Toolcraft ZD-8925 Desoldering gun,
to keep the cable and vacuum hose together.
They will probably work for other brands too, if they use the same cable/hose sizes.
The cable of the Toolcraft ZD-8925 is 6mm in diameter.
The hose of the Toolcraft ZD-8925 is 7mm in diameter.
There are two styles of clips. One is an “S” curve and the other one a “C”
Personally, I like the “C” clip better, but they both work great.
I used 7 clips for the whole cable and placed them with 150mm spacing (about 6").