Trinity Mandala (No MMU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A triple-motif mandala for your wall, printed in four parts, no glue and no MMU.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 50
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
A triple-motif mandala for your wall, printed in four parts, no MMU/AMS needed.
I split the model into four parts to have more control over where colors appear, while still using basic by-layer filament switching. All parts snap together by hand, and in my case, hold together without any additional encouragement. However, snugness could be improved by a strategic drop of glue here and there.
Be aware that a couple of the parts can be a tight fit and may take some massaging to snap fully into place.
Two keyhole hangers on the back let you pick which direction is ‘up’. Slots are sized to fit an average #4 or #6 screw (8.5mm hole diameter, 4.5mm slot width).
.3mf files are provided with the color changes and ironing modifiers I used (Printed on a Prusa mk4s).
-----------------------------------------------------------------------------
Filaments I used:
IIID Max PLA+ - Navy
IIID Max PLA+ - White
IIID Max PLA+ - Mystic Purple
IIID Max PLA+ - Blue
Prusament - Azure Blue
Polymaker - Panchroma Starlight Neptune