1 / 2
PIR Motion sensor offset conduit adapter pipe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/2inch conduit offset adapter pipe to lower the PIR motion sensor head below the floodlight bulbs for full view
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print your own 1/2inch conduit offset adapter pipe to lower the PIR motion sensor head below the floodlight bulbs for full view sensing. The short end screws into the lamp holder center hole and drops down so that the sensor head can attach to it well below the bulbs. It's best to print in PETG, PCTG, or ASA at a 45 degree upright angle on the printer. Print with 0.20mm layers, 3 walls, tree slim supports at 25 threshold angle, build plate only, see pic of slicer preview.