Iphone 16 Pro Max Night Stand & Charger Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic charger stand to use with generic Amazon special MagSafe puck.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Public Domain
I made it to glue together but it ended up being a fairly tight fit so did not need it. I know there are other models out there that are probably better but I wanted to make my own to suit my exact case and charger both of which are cheaper units from Amazon.. Charging puck is 56mm diameter and the case is fairly bulky which means the stand would probably work for almost any case you may have. The magnet does most of the holding in place so the ledge the phone sits on is not really necessary.
Not sure why the stl's are standing vertical after upload but obviously print laying flat with a tree support under the overhang.