TechnoLine WT 536 / 538 Projection alarm clock Wall mount bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TechnoLine WT 536 / 538 Projection alarm clock Wall mount bracket with cable storage compartment
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount bracket for the TechnoLine WT 536 or TechnoLine WT 538 Projection alarm clock with cable storage compartment.
This bracket is used to mount the projection clock on a vertical surface in order to achieve the optimal position for time projection.
Printing recommendation:
0.4 nozzle, 0.2mm structural, no supports
Mounting recommendation:
Mount the bracket at two points with a horizontal hole spacing of 140mm using countersunk screws with a diameter of 3-3.5mm
Feed the plug through the opening on the bottom or side and tuck the remaining cable into the compartment behind the alarm clock. Slide the projection alarm clock into the recess and connect the cable to the clock. Connect the power supply to the mains power supply. Adjust the projection beam as desired.