1 / 3
Realistic Tea Light Candle Holder - Zero Seam - Low Poly - Fast - Under 25min
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn a flameless tea light candle into a realistic looking candle. Slice with spiralize for ultra fast print & no seam.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slicer settings I used for the Candle in the photo:
25 minutes • 4g • 1.29m
| Setting | Profile Value | Unit |
|---|---|---|
| Wall Thickness | Calculated | mm |
| Wall Line Count | 1 | |
| Alternate Extra Wall | False | |
| Z Seam Alignment | back | |
| Bottom Layers | 0 | |
| Top/Bottom Pattern | concentric | |
| Printing Temperature | 230 | °C |
| Initial Printing Temperature | 225 | °C |
| Wall Speed | 40 | mm/s |
| Travel Speed | 220 | mm/s |
| Initial Layer Speed | 15 | mm/s |
| Retract at Layer Change | True | |
| Z Hop When Retracted | True | |
| Minimum Layer Time | 7 | s |
| Minimum Speed | 7.0 | mm/s |
| Enable Coasting | True |