hand carder add on to round the flat wood
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An add on to put between the wood plan and the carding cloth to round the hand carder and enhance the process.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 8
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
[français en dessous]
English
I made this piece to make a hand card without having to round a piece of wood. The carding cloth must be bought separately.
I used 10mm plywood for the main part and 22 mm round bits for the handle. Once the wood is assembled, I used 3mm screws to screw the add on on the wood and then I stapled the carding cloth on it. Since my staple gun isn't powerful enough I also drilled holes and put some screws to keep it tight.
I have included the source file written with openscad. It has parameters for the size of the screws and the width of the piece. Since the depth of the piece is a difficult trigonometric equation to solve I didn't put it with a parameter. It is fixed for a 105 mm depth carding cloth.
I have also included two STL files, one with 195 mm width and one with 230 mm width which correspond with the two styles of carding cloth I have at home.
The add on can also be used to round a commercial hand card who are flat. It's the case for the cheaper hand cards. You have to remove the carding cloth, screw the add-on onto the wood and then staple the carding cloth onto the add on.
I made it with PLA but PETG may be a better option for the stapling of the carding cloth.
Français
J’ai décidé de modéliser cette pièce pour arrondir la surface d’une carde pour améliorer son utilisation. Je me suis servi de cette pièce pour créer une paire de cardes à main en bois. J’ai acheté un tapis de carde séparément.
J’ai utilisé du contreplaqué 10 mm pour la partie plate et un tourillon de 22 mm de diamètre pour la poignée. Une fois le bois assemblé, j’ai utilisé des vis de 3 mm pour visser la pièce plastique dans le contreplaqué. J’ai ensuite agrafé le tapis de carde dessus. Mon agrafeuse n’étant pas assez puissante j’ai complété la fixation avec des vis.
J’ai inclus le fichier source écrit avec openscad. Il a des paramètres pour la taille des vis et la largeur du tapis de carde. Vu que la profondeur est régie par une équation trigonométrique difficile à résoudre, je ne l’ai pas paramétrée. Elle est fixe pour un tapis de carde de 105 mm de profondeur.
J’ai aussi inclus deux fichiers stl. Ils correspondent à des tapis de cardes de 195 mm de largeur et 105 mm de profondeur pour l’un et 230 mm de largeur et 195 mm de profondeur pour l’autre, ce qui correspond aux deux types de tapis de cardes que je possède.
La pièce peut aussi être utilisée pour arrondir des cardes à main du commerce qui ne sont pas arrondies. C’est souvent le cas pour les modèles les moins chers. Vous devez alors retirer le tapis de carde, visser la pièce dans le bois et ensuite agrafer le tapis de carde à la pièce plastique.
J’ai imprimé cette pièce en PLA mais elle gagnerait sûrement à être imprimée en PETG afin de faciliter l’agrafage du tapis de carde dessus.