1 / 4
IKEA Olov Table Leg Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of a very clean design. I increased the thickness and made a cut out to sandwich a 100mmx50mm L bracket.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 1
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of a very clean design. I increased the thickness from 4mm to 8.25mm and made a cut out to sandwich a 100mmx50mm L bracket between the spacer and the Lagkapten table top I'm using that is attached to a 4x2 Kallax shelf unit. The purpose for the L bracket is to anchor the Ikea hack workbench to the wall.
I used Olov legs, but this is the standard Ikea round pattern for a table leg so it should work for other legs.
Printed from Overture white PETG with 20% 3D honeycomb infill.