1 / 5
AD5X Aux Fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is an AUX fan for print cooling
- Rating
- 3 / 5
- Likes
- 29
- Downloads
- 109
- Makes
- 0
- Views
- 1,221
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
You will Need to buy a 12032 24V blower fan and will be ausing PLA FAN on the mainboard and can be controlled in the slicer filament cooling setting
for mounting you will need
m3 x 40 with nylock nuts / M3 x 15 with nylock nuts
M3 x 15 course thread for mounting to the AD%X bottom
You will find that the fan mount will line up with 2 holes on the left side of the printer. you will also have to make a little hole into the back too then be wired with JSP-XH4
you will have to power it by a 24v pwm fan controller or Find a way on the mainboard to power the Fan