1 / 4
Thunderbird 3 Display Stand Corgi
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corgi Thunderbird 3 Display Stand.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Printed at 0.2mm w. 0.4mm Nozzle - PETG - PLA should work with this however.
15% Infill (honeycomb is my preference because hexagons are the bestagons).
Walls >2. Top & Bottom layers set to >3.
It can be printed with no supports however if cooling is not adequate for the desired filament type use the below advice.
It is recommended to add painted supports in the desired area (see picture). My preference is Tree supports due to the geometry of this part.
Happy Printing