Logitech Driving Force Shifter Mount for 1.5" T-Slot Aluminum Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a Logitech driving force shifter to a racing sim rig
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Designed for a 1.5" T-Slot profile. Required hardware:
4x M8 14mm hex socket head screws (16mm works too, in a pinch)
4x M8 T-nuts
2x M6 20mm screws
Print in a stiff material (PLA should be fine) without supports of any kind.
Remove the sacrificial bridging layer in the horizontally printed profile mounting holes (pushing a screw through works well) and clean them.
Mount to frame with M8 screws and T-nuts but don't fully tighten to allow for positioning.
Open the shifter clamps all the way and tightly fasten the shifter to the mount with the M6 screws.
Tighten the shifter clamps to prevent rattling.
Slide the mount to the desired position.
Fully tighten the M8 screws to the frame.
STEP file is included for remixing.