3D Scanner Bar Marker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bar Marker to aid in 3D Scanning a Tall Model ( and perhaps leaning onto it )
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 185
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM:
M6 Allthread ( and the means to cut them down to 25mm Length )
INSTRUCTIONS:
The Model is about 206mm Tall with a 37mm Diameter at the Base REQUIRING Supports an possibly a Brim due to the bottom Geometry having a Cavity to increase the Stability when on a Rotary Table.
To actually attach it to the Revopoint Rotary Table you'll be needing 25mm of M6 Allthread ( not sure about the MetroX variant but the MetroY Pro uses M6 Inserts, NOT ¼" ones ) cut to length to be inserted into the Hole at the bottom which has an oversized portion to aid with getting it in straight followed by an undersized one to actually thread into:
