1 / 2
3D Scanner Ball Marker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ball Marker to aid in 3D Scanning a Model
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 225
- Makes
- 0
- Views
- 575
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM:
1x 8x3mm Magnet ( Optional )
INSTRUCTIONS:
The Model is about 24mm Tall with a 30mm Diameter requiring neither Supports nor a Brim.
You'll be needing 11x ID 6mm / OD 10mm Scan Markers per Ball to populate all the Flat Spots on the Model. The Bottom also has a Recess for installing a 8x3mm Magnet into.