Airsoft Mk23/ssx23 X300 flashlight mounting adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter piece for the x300, so it can be mounted on the Airsoft Mk23
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
There wasn't really good way to mount a flashlight on the mk23. I realised that one version of the X300 comes with a plastic mounting piece, that is screwed onto the light.
Image source: Evike.com
I essentially just replaced that with a part that fits the mk23 rail. Should slide on with a tight fit already, and the tensioning screw clamps it onto the rail properly. So far only tested on the ssx23 and TM Mk23
I used a Square nut, but also added a version for regular hex nuts
Parts:
6x M2x10 screws
1x M3x40 screw shortened to around 36mm (so it doesn't stick out too far on the other side)
1x M3 Nut
Your X300 light might be slightly different from this copy and you might need to slightly modify the print