18cm/7inch audio tape reel mmu or single color print created in OpenSCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
18cm/7inch audio tape reel mmu or single color print created in OpenSCAD
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 63
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted designs you can use the OpenSCAD source file to do that.
There are three hole markings on each side of a spool you can screw self tapping countersunk screws. Just for pimping it up. ;-)
Or create your own design by tweaking the attached OpenSCAD source file.
I printed my multi color wheels in PETG:
- black for the decorative center disc
- orange for the text logo
- translucent grey for sides an the hub (inner/outer)
After printing two side panels, one with inner hub and the other with outer hub part, they where press fitted together by hand. It may depend on printing tolerances if this will work.
Otherwise you can leave the inner hub part on the back wheel out and put it together with screws only. For this you have to export the STL-files from OpenSCAD accordingly.
Have fun!