1 / 4
Ball Socket Joint - Fusion test model and steps included
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Was in a need for a low profile ball socket joint and came up with this
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
- create the two parts touching each other what you want to connect
- bottom part: 5mm circle, extruded to 1mm (half of the “ball_fillet” parameter)
- new sketch on this extruded 5mm circle, circle with the size of "ball" parameter
- add the “ball_fillet” to the bottom of the ball
- combine the two parts the following way: target body top part, tool body bottom part, cut operation, keep tools yes
- press pull the inner part of the socket by the "tolerance" parameter (top part)
- add the chamfer on the socket part using the “socket_chamfer” parameter