G-Shock PIP Watch Strap for Mudman G9000
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print in place replacement watch band you could remix for other models!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've had this watch for almost 15 years now and its still going strong. However, the resin strap (default watch strap) has given up. The G Shock Mudman G9000 requires an adapter to use generic watch straps, or an original must be purchased. Since I was hoping to print an adapter anyways, I decided to continue and make a flexible watch strap with magnets for locking. This is my 16th adapter (final one I promise) and 3rd watch strap version.
The hinges are conical to allow perfect layers and tolerance. I ensure a smooth movement, flex the watch strap in all directions to its limit (ideally rapidly). This should dislodge/ grind away any burrs and bits that may cause a problem.
Counter-sunk holes in the adapter allow for the mounting screws to be flush with the strap.
Magnets used: Neodymium 5x3x2mm (8 of them) and fixed in place using two part epoxy resin post print.