1 / 1
Raspberry Pi 3A+ Case with Camera Arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi 3A+ case with a lid mounted camera arm.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 140
- Makes
- 1
- Views
- 945
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I modified the 5cm shaft and added a tab to mount the arm on the case lid and a slot for the camera ribbon cable.
Lid requires supports.
Included .3mf project file was used to print the pictured model.
M3 x 20mm (min. length) bolts to mount the shafts together and to the lid. I suggest nylock nuts. I used spare hardware I had left from my MINI+ spare hardware, so a couple bolts in the picture are longer than necessary.
Posting your makes, leaving reviews, commenting with suggestions or requests is appreciated.