baseboard end cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.53 – €0.65 net (excluding VAT)
For file: Fussleistenendstueck_V6_0.15mm_PLA_MK3SMMU2S_42m_right.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.59 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 42 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It is a cover for our baseboard in the livingroom.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is my first run in Fusion360 and designing something with a porpouse. It is a baseboard cover for the livingroom. We have a sliding glasdoor and with that no doorframe the baseboard could run against. This is specific to our type/brand of baseboard. It slides in and does not require to be glued. Feel free to use and change it.