Kohler Shower Shelf Accessories
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.55 – €0.67 net (excluding VAT)
For file: Shower Hook v4_0.4n_0.15mm_PETG_MK4ISMMU3_45m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 45 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapters to help make use of the slot in the Kohler K-97623-SHP 21" floating shower shelf.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
These are two types of drop in adapter for the slot in the Kohler 21" Floating shelf:
https://techcomm.kohler.com/techcomm/pdf/K-97623_spec_US-CA_Kohler_en.pdf
One is a hook that drops through for hanging cloths or a shower squeegee from. It leaves a flat surface on top to not interfere with shampoo bottles. Printing tip: Orient on your build plate so the hook is horizontal and parallel to the build plate for the greatest strength (see example print file for the MK4 with MMU). Also, set the number of perimeters to at least 4 for additional hook strength.
The other model is to make a space to hold a razor. I created 3 sizes, but recommend starting with the ‘Med’ one for wider bodied razors. The wide one might work for something larger than a razor, so I included it. No special build instructions for this part.