1 / 5
Fader Frigate (Benchy Knob)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Show off your passion for audio and 3D printing.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 7
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Set sail on the sea of selecting.
This is what happens when staff lines meet layer lines.
The configurations are as follows:
"normal" means that the flat of the shaft is towards the back of the boat (stern)
"reverse" means the flat is towards the front (bow)
"shallow" has a depth of .26" or a little over 6.5mm
"deep" is 3/8" or 9.5mm
About the printing
.2mm layer height
2 perimeters (walls)
3 bottom layers
4 top layers
20% infill (I used grid)
Have fun and Float On