CopyRing for Makita Router (RT-Series).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a ring 30mm that you can use as a copyring if you have a MakitaRouter like the RG001GZ (which I'm using).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed a copyring for my Makita Router. With this copyring (30mm) I'm able to use a 20 mm routerbit, and use it as a hole-locator for using my diy MFT template for drilling holes in MDF. The baseplate of the copyring has two indent, which makes it easy to insert/remove the part from the routerbase, without completely loosen the screws, which are holding the plate in place. Just loosen the screws a little bit, and turn the indent, to the screw, and you can simply remove (or insert) the ring in the baseplate of the Router).
The ring will proberly fit other routers as well, as long as the the baseplate has place for this 67 mm
Printing:
- 0.4mm Nozzle,
- PETG/PLA
Settings:
- Just increase wall-thickness to 3 perimeters, and all other settings should be okay. Don't need supports.
- So it's an easy print.