Adjustable angle flat lapidary

This is an adjustable angle, 6 inch flat lapidary.  

It's designed to use diamond polishing discs and hook & loop discs. You will need an XD-3420 electric motor, any grit of 6 inch diamond flat laps using a ½ inch arbor hole. If you use the hook and loop arbor, you will need a 5 inch hook & loop backing pad as well as some 6 inch hook & loop sanding discs. I use grit 400-5000. You will also need an adjustable power supply. For the water I used a small aquarium pump hooked to a 5/16" pneumatic air flow control, push to connect fitting. For the hardware you will need, 2x M6 nuts & M6x20mm bolts, 1x M2x20mm bolt and nut, 2x M5x15mm bolt, 1x M5x50mm bolt and 4x m5 nuts. I designed this so the stand can be filled with plaster of Paris, to add weight and rigidity. If you want to do this keep the infill at 3-15% infill and use gyroid or 3d honeycomb. I just drilled a hole in one of the sides of the base and used a funnel to pour in the plaster. you can also screw it down/ to a piece of wood to keep secure. I included images of all the items I used from amazon. I hope this can make things a little easier for people looking to get into Cabbing rocks. Amazon links-

drip control- https://a.co/d/4D062Rb

water pump- https://a.co/d/4bCvRMa

Hook&loop discs- https://a.co/d/6m1CC2e

Interference pad for 6 inch- https://a.co/d/heM0Kd2

interference pad for 7 inch- https://a.co/d/6THftcc

XD-3420 motor- https://a.co/d/epj33Zj

Power pigtail (you can use the alligator clips that come with power supply instead)- https://a.co/d/cUc6qC1

Power supply- https://a.co/d/2DGhNKA

Diamond Discs- https://a.co/d/a7VHBu2