Low Profile Machining Vice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile machining Vice for designed to bolt to Sainsmart Genmitsu 3030 pro ver max. (50mm x 80mm bolt pattern)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Low profile machining vice for sainsmart gemnitsu 3030 prover max.
I printed at 100% infill with pet - cf filament. It's super solid like this but probably way over kill. I would recommend printing the jaws solid since you can machine them a few times if you happen to mill into them.
Print -
1x vice base
2x jaw1
1x jaw2
Hardware needed -
4 - m6 x 1 x 10mm socket head cap screws (attaches vice to machine use longer if you have spoil board installed)
6 - m3 x 25mm machine head screws (fine or course)
9 - m3 nuts to match your machine head screws (6 for jaws + 3 for clamp tightening bolt)
1 - m3 x 45mm (or longer) for clamp tightening bolt.