1 / 3
Voron hose exhaust with 5015 fans — image 1
1 / 3

Voron hose exhaust with 5015 fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This model will allow you to upgrade your Voron exhaust to use 2 x 5015 blower fans and a hose to exhaust outside.

Rating
0 / 5
Likes
5
Downloads
15
Makes
0
Views
162
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This model will allow you to modify your existing Voron exhaust housing to attach a 1.5" hose similar to those found on shop vacuums that will allow you to vent print fumes from ASA and ABS outside of your workshop. It replaces your stock fan to 2 x 5015 blower fans that provide higher static pressure to push the air out of the hose and generate a negative pressure inside the printer enclosure. This to completely eliminates any odours from ASA or ABS prints without needing carbon or HEPA filters as everything is vented outside.

This model comprises of two parts:

  • A hose adapter that replaces the stock fan grill to allow you to connect the exhaust of your Voron printer to a hose so you can vent print fumes outside.

  • A fan adapter that will allow you to mount 2 x 5015 blower fans into the existing Voron exhaust housing.

What you will need to attach the hose and fan adapters to the exhaust housing:

  • 4 x M3 x 12 cap screws

What you will need to attach the fans to the fan adapter:

  • 2 x 5015 blower fans (24V with ball bearings recommended)

  • 2 x M3 heatset inserts (Voron standard)

  • 2 x M3 x 20 cap screws

  • 2 x M3 washers

I used 2 x 2 wire WAGO lever splices to join the fan wires together. This is optional as the wires can be soldered, but I preferred this as it allows the fans to be serviced easily.

Printing profile (recommended):

  • LAYER HEIGHT: 0.2mm

  • EXTRUSION WIDTH: Forced 0.4mm

  • INFILL TYPE: Grid

  • INFILL PERCENTAGE: 40%

  • WALL COUNT: 4

  • SOLID TOP/BOTTOM LAYERS: 5

  • SUPPORTS: None

Revisions:

25-DEC-2025 : Adjusted fan adapter to be preferred printing orientation, added picture of finished assembly, added printing profile recommendation.

Tags