CORE One Rivet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement rivet for the CORE One. Modeled after the included 3.1x4.5 rivets
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 84
- Makes
- 0
- Views
- 576
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes you need just one and you need it NOW! I modeled up this rivet when I could not find my spares. Printed with a 0.25 nozzle and 0.12 layer height. Ideally would be printed in a soft nylon, like the original, but TPU works well.
With TPU, the breakage at layer lines is less of an issue. My cleanest TPU print was printed in the head-down orientation and with supports only from the build plate. You WILL have to trim off the supports, and may need to trim the ledge to fit, but the remaining faux-rivet will work well on the CORE One, at least until your full order of rivets arrives!
Modeled after: https://www.prusa3d.com/product/nylon-rivet-3-1x4-5-55-pcs/