1 / 3
AD5X Enclosure LCD mount with screw in attachment and Switch location.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of FF Enclosure LCD mount bar. Added two heatserts for more secure attachment as well as a spot for a switch.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 65
- Makes
- 0
- Views
- 1,218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of FF Enclosure LCD mount bar that is slightly longer and with more solid mounting.
CHANGES:
- Added 1.5mm to the left side for better fit.
- Added two heatserts (orange in pict) for more secure attachment to frame, no more floppy LCD display.
- Added a location for a small switch to control; led, fans, or….
USE AT YOUR OWN RISK & ONLY USE BUTTON HEAD SCREWS
Clearance with toolhead is very close and I take no responsibility if your toolhead crashes, mine clears fine with button heads.
SWITCH USED (I chose 3P3D version, make sure dimensions match pictures in this post):
https://www.amazon.com/dp/B07BD1NNCC
MUTIPLE OPTIONS (All are longer with switch port and heatsert locations):
- AD5X logo with frame tabs.
- AD5X Logo no frame tabs
- Blank with frame tabs
- Blank with no frame tabs.