1 / 4
Clothes Hanger for Doll Clothes / Kleiderbügel für Puppenkleider - Var. 2 — image 1
1 / 4

Clothes Hanger for Doll Clothes / Kleiderbügel für Puppenkleider - Var. 2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clothes Hanger for Doll Clothes / Kleiderbügel für Puppenkleider - Var. 2

Rating
4.9 / 5
Likes
83
Downloads
1,088
Makes
11
Views
3,097
Reviews
10

Updated at source:

Model information

License
Creative Commons — Attribution

English

This is another variant of doll clothes hangers I created for my granddaughter, because the number of doll clothes by far exceeded the number of hangers available - the situation was critical ;-)

Because of the different sizes of the doll dresses I created 2 hangers - 155 and 180 mm length. The STL files are named accordingly.

 

Printing guide

You can use the default slicer settings, but to save material and time, I used the following settings:

Layers and Perimeters

  • Layer hight: 0,35 (when using a 0,6mm nozzle!)
  • Perimeters: 3
  • Solid Layers: Top 0, Bottom 0

Infill

  • Fill density: 15% - 25%
  • Fill pattern: Honeycomb

The project file is ment as an example.

 

Deutsch

Dies ist eine weitere Variante von Puppenkleiderbügeln, die ich für meine Enkelin entworfen habe, da die Anzahl der Puppenkleider die Anzahl der vorhandenen Kleiderbügel bei weitem überschritten hat - die Situation war kritisch ;-)

Wegen der unterschiedlichen Größen der Puppenkleider habe ich 2 Bügel erstellt - 155 und 180 mm Länge. Die STL-Dateien sind entsprechend benannt.

 

Druckanleitung

Man kann die Standardeinstellungen des Slicers verwenden, aber ich habe, um Material und Zeit zu sparen, folgende Einstellungen verwendet:

Schichten und Konturen

  • Schichthöhe: 0,35 (bei Verwendung einer 0,6mm Düse!)
  • Konturen: 3
  • Massive Schichten: Top 0, Boden 0

Infill

  • Fülldichte: 15% - 25%
  • Füllmuster: Bienenwabe

Die Projektdatei ist als Beispiel gedacht.

Tags