Baroque monstrance/reliquary

Baroque monstrance or reliquary with lockable inner assembly. Total height: 346 mm or 13 3/5 inch (see pictures, ciborium for scale). The largest dimensions while printing in each axis are x: 232 mm, y: 229 mm, z: 196 mm. According to the relic inside, the front rim might be decorated with the relevant symbol or attribute. The adapter has to be modified for the specific theca of the relic inside, but I have uploaded a general design.

The parts are: base, main body, smaller and bigger rays, front rim holding a D=45 mm, v=1 mm glass, backplate, two pieces for securing the inner adapter (plate and pin) and four pieces for the adapter itself. The connecting dimensions are designed mostly nominally, so some post-processing or gluing might be required, according to your settings. Revell 94 Gold and Revell 90 Silver modeling paints were used. Printed with Creality HyperABS.

The adapter is locked in place by the two securing elements, the plate and pin, and those are wrapped around with a thread in a way, that the thread goes around the back of the plate and also through the holes of both the plate and pin. If the thread is sealed with a wax seal or something similar, than the adapter cannot be taken out without residual deformation or damage to one or more parts of the reliquary. See picture.