1 / 3
Reservoir Holder for Bissell Little Green Mini — image 1
1 / 3

Reservoir Holder for Bissell Little Green Mini

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds the reservoir for the Bissell Little Green Mini upright, making it easier to fill

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

We recently got a Bissel Little Green Mini portable carpet cleaner, however it has a pretty annoying design flaw.  The reservoir needs to be taken out of the machine and turned upside down to be filled, and the “top” (bottom) of the reservoir is curved and doesn't sit flat on the counter.

So this was my attempt to make this a bit easier - a holder for the reservoir so it could sit upright and be filled more easily.

It definitely works, however I have a few things I'd maybe improve on in the future, if I ever needed to print this again:
- The inside dimensions are not perfect - it should probably be ~5mm shorter in the short direction.  It's also slightly too large on the long direction, but almost perfect.
- The walls are probably too thick - could probably save some plastic and time by making them thinner
- Given that the reservoir is curved, two of the corners could probably be cut off at an angle or arc, saving some plastic