E-Stop holder RatRig vcore4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E-Stop holder RatRig vcore4-400mm
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 14
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The E-Stop holder is made to mount it to an RR vcore4-400mm with enclousure on the top right corner. I will upload pictures once I've mounted it. The E-Stop itself is mounted with an M3x10 screw in the heatset insert. Only one mounting point isn't ideal, but I couldn't add another insert, because there is already the cable hole. I printed it from PETG.
In addition I used/made these models:
Cable gland: https://www.printables.com/model/114283-cable-gland-all-sizes
Strain relief for this cable gland: https://www.printables.com/model/1474155-parametric-tpu-cable-gland-strain-relief
Electronic box opening: https://www.printables.com/model/1412269-ratrig-vcore4-electronic-box-cable-opening
Zip tie cable guide: https://www.printables.com/model/1497118-parametric-zip-tie-holder-fixed-by-a-screw