120 Film Holder, 3 Slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A film holder for 3 rolls of 120 film in their wrappers
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 63
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my 120 film holder! I was gifted a mass-produced one last year but found a number of flaws in its design, including that it was clearly not made for storing 120 film in the wrappers. This is a problem as that's where the expiry date is, and as 120 film isn't sealed inside a snazzy little can like 135 it's useful to protect it from humidity etc.
So this is my design. It has a friction fit for the lid with relief grooves to prevent an excessive suction effect, and it's sized to fit most wrappers (the weirdly thick ones on Foma film might need to be squished a bit).
I've printed a bunch of these in Polymaker PolyTerra PLA and some other filaments, and the fit seems pretty consistent. It will be a looser fit in cold conditions, but that's intentional as otherwise it'd likely jam in hot conditions.
I've refined my print settings for this over time, so I've included my OrcaSlicer process preset file for reference. OrcaSlicer sometimes reports an error about non-manifold edges but as far as I can tell it's irrelevant.
I would recommend printing this in object order so that you don't get more obvious lines on each part as the printer does the slow lower layers for the other. I paint the seams on the ends manually but they'll be visible everywhere due to the design, so play around with other positions if you like. Some other key settings I've found are enabling ironing for the top-most layers and setting ironing flow to 30%, arachne walls with 3 wall loops and inner/outer/inner order, 10% sparse infill with grid pattern (feel free to experiment here).
No supports or brims necessary, but make sure you level your bed properly to get a nice finish on the bottom of the two parts.
Check out my 5 slot version if, like me, you carry way too much film with you at all times: